[Skip to Content]

Chattanooga Office: 423-553-1351
Knoxville Office: 865-546-4009
Nashville Office: 615-515-1480

Technical Tips: Lubrication

Air compressor lubrication tips

If this section doesn't quite address what you want to know, feel free to email us or call us at any of our three, convenient locations for assistance. Our expert staff and technicians welcome the opportunity to help you keep your system operating at peak performance.

Too much lubrication can be just as harmful as too little and can be a major cause of premature motor failure. Here are some things to keep in mind:

  • Motors – Motors should be lubricated according to the manufacturer's specifications, which can be anywhere from every two months to every 18 months, depending on annual hours of operation and motor speed.
  • Grease Fittings – On motors with bearing grease fittings, the first step in lubrication is to clean the grease fitting and remove the drain plug. High quality new grease should be added, and the motor should be run for about an hour before the drain plug is replaced.
Tech Tips: Lubrication

© 2009-2017 IDG Tennessee Compressor. All rights reserved. | Site Map | Web site design & development by Digital Harvest Media